Eaton Hydraulic Vane Motor 25M 35M 45M 50M With Dual Pressure Plate
Rotation: | 30.0 LB |
Shaft End Flow @ RPM: | Flange Mount |
Port Orientation - Cover End: | Right Hand (CW) |
Mounting Flange: | V2010-1F7S1S-1AB12 |
Minor Diameter: | 1 1/2 |
Pump Series: | Flange |
Cover End Flow @ RPM: | 3/16 in |
Pilot Type: | N/A |
PDF |
|
Product Details
Rotation | 30.0 LB |
Shaft End Flow @ RPM | Flange Mount |
Port Orientation - Cover End | Right Hand (CW) |
Mounting Flange | V2010-1F7S1S-1AB12 |
Minor Diameter | 1 1/2 |
Pump Series | Flange |
Cover End Flow @ RPM | 3/16 in |
Pilot Type | N/A |
Cover End RPM [Max | 0.875 in |
Manufacturer Part No. | Straight w/ Key |
Seal Material | V2010 |
Port Type | 2.3125 in |
GPM @ 1,800 rpm, Shaft End | Buna-N |
Shaft Key | 3000 |
Pressure Port Size, Shaft End | N/A |
Shaft End Pressure [Max | SAE B, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
Shaft End RPM [Max | N/A |
Relief Valve Setting | 3000 |
Cover End Pressure [Max | 3000 |
Mounting | N/A |
Weight | 1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm |
Port Size | N/A |
Minor Diameter [Min | N/A |
Max. RPM [Max | N/A |
Shaft Length | N/A |
Spline Description | N/A |
Shaft Seal Type | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Minor Diameter [Max | V2010-1F7S1S-1AB12 |
Integral Valve Configuration | 2500 |
Major Diameter [Max | 2500 |
Model No. | 1.5 |
GPM @ 1,800 rpm, Cover End | 10.5 |
Major Diameter [Min | N/A |
Port Orientation - Shaft End | Outlet 45° CCW from Inlet |
Displacement Cover End (cu in/revolution) | Outlet Opposite Inlet |
Pressure Port Size, Cover End | 1/2 in SAE O-Ring |
Displacement Shaft End (cu in/revolution) | 3/4 in SAE O-Ring |
Shaft Dia. | 0.2 |
Shaft Type | 1.39 |