Blow Molding Machine Sumitomo Gear Pump With Low Pressure Pulsation
| Shaft Key: |
76.0 LB |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Right Hand (CW) |
| Max. RPM [Max: |
3525VQ38A12-1AA20 |
| Shaft End RPM [Max: |
3 |
| Shaft Length: |
Flange |
| Major Diameter [Max: |
5/16 in |
| Manufacturer Part No.: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Key |
76.0 LB |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Right Hand (CW) |
| Max. RPM [Max |
3525VQ38A12-1AA20 |
| Shaft End RPM [Max |
3 |
| Shaft Length |
Flange |
| Major Diameter [Max |
5/16 in |
| Manufacturer Part No. |
Standard Pilot |
| Pressure Port Size, Shaft End |
1.25 in |
| Major Diameter [Min |
Straight w/ Key |
| Minor Diameter |
3525VQ |
| Shaft End Pressure [Max |
2 1/2 in |
| Weight |
Double |
| Cover End RPM [Max |
Buna-N |
| Minor Diameter [Min |
2400 |
| Controlled Flow Rate |
N/A |
| Mounting |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Pilot Type |
N/A |
| Shaft Dia. |
2500 |
| Cover End Flow @ RPM |
2400 |
| Relief Valve Setting |
N/A |
| Port Orientation - Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Spline Description |
N/A |
| Port Orientation - Cover End |
N/A |
| Pump Series |
N/A |
| Shaft Type |
N/A |
| Port Size |
N/A |
| Cover End Pressure [Max |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Rotation |
3525VQ38A12-1AA20 |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Port Type |
3000 |
| Minor Diameter [Max |
18 |
| Mounting Flange |
57 |
| Model No. |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 135° CCW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
Outlet Opposite Inlet |
| Integral Valve Configuration |
1 in Flange |
| Seal Material |
1 1/4 in Flange |
| Pressure Port Size, Cover End |
2.5 |