QT Series Hydraulic Gear Pump For Forging Machinery And Elevators
| Port Type: |
75.0 LB |
| Port Size: |
Flange Mount |
| Model No.: |
Right Hand (CW) |
| Relief Valve Setting: |
3520VQ30A11-1DD20 |
| Port Orientation - Cover End: |
3 |
| Pilot Type: |
Flange |
| Cover End Pressure [Max: |
5/16 in |
| Shaft Length: |
Standard Pilot |
| PDF |
|
Product Details
| Port Type |
75.0 LB |
| Port Size |
Flange Mount |
| Model No. |
Right Hand (CW) |
| Relief Valve Setting |
3520VQ30A11-1DD20 |
| Port Orientation - Cover End |
3 |
| Pilot Type |
Flange |
| Cover End Pressure [Max |
5/16 in |
| Shaft Length |
Standard Pilot |
| Shaft Key |
1.25 in |
| Port Orientation - Shaft End |
Straight w/ Key |
| Minor Diameter |
3520VQ |
| Major Diameter [Min |
2 1/2 in |
| Shaft Seal Type |
Buna-N |
| Shaft End Flow @ RPM |
2500 |
| Seal Material |
N/A |
| Weight |
SAE C, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Major Diameter [Max |
N/A |
| Cover End Flow @ RPM |
2500 |
| Mounting Flange |
2500 |
| Shaft End RPM [Max |
N/A |
| Shaft End Pressure [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
N/A |
| Rotation |
N/A |
| Cover End RPM [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Manufacturer Part No. |
N/A |
| Pressure Port Size, Cover End |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Integral Valve Configuration |
3520VQ30A11-1DD20 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Mounting |
3000 |
| Spline Description |
16.5 |
| Controlled Flow Rate |
45 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Pump Series |
Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CW from Inlet |
| Shaft Type |
3/4 in Flange |
| Minor Diameter [Max |
1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) |
2.22 |
| Shaft Dia. |
5.96 |