Rexroth SV30PA1-4X/ check valve
YOU’LL Deep Groove Ball Bea Bearing Used FIND AN EXTENSIVE SELECTION OF Rexroth SV30PA1-4X/ check valve FOR UKL Hydraulic Components Co., Ltd. No Bearing Retained 25 ～ 50 T(mm) SALE.
| Brand Name: | Rexroth |
| Model Number: | SV30PA1-4X/ |
| Cover End Pressure [Max: | 45.0 LB |
| Seal Material: | Flange Mount |
| Max. RPM [Max: | Left Hand (CCW) |
| Shaft Length: | 2520VQ17A11-11AA20-LH |
| Rotation: | 2 1/2 |
| Cover End RPM [Max: | Flange |
| Displacement Shaft End (cu in/revolution): | N/A |
| Integral Valve Configuration: | Standard Pilot |
Product Details
| Cover End Pressure [Max | 45.0 LB |
| Seal Material | Flange Mount |
| Max. RPM [Max | Left Hand (CCW) |
| Shaft Length | 2520VQ17A11-11AA20-LH |
| Rotation | 2 1/2 |
| Cover End RPM [Max | Flange |
| Displacement Shaft End (cu in/revolution) | N/A |
| Integral Valve Configuration | Standard Pilot |
| Mounting Flange | 0.875 in |
| Shaft End RPM [Max | 13 Tooth Splined |
| Mounting | 2520VQ |
| Pilot Type | 1 3/8 in |
| Port Orientation - Shaft End | Buna-N |
| Major Diameter [Min | 2500 |
| Displacement Cover End (cu in/revolution) | 0.715 in |
| Port Type | SAE B, 2 Bolt |
| Pressure Port Size, Cover End | Single Shaft Seal |
| Pump Series | 16/32 |
| Shaft Type | 2700 |
| Weight | 2500 |
| Manufacturer Part No. | N/A |
| Port Orientation - Cover End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Model No. | 0.873 in |
| Shaft Dia. | 0.872 in |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Major Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Minor Diameter | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size | 2520VQ17A11-11AA20-LH |
| Spline Description | 3000 |
| Shaft End Pressure [Max | 3000 |
| Relief Valve Setting | 16.5 |
| Minor Diameter [Max | 25.5 |
| Shaft Key | w/o Integral Valves |
| Pressure Port Size, Shaft End | Outlet 135° CCW from Inlet |
| Shaft Seal Type | Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Cover End | 3/4 in Flange |
| Cover End Flow @ RPM | 1 in Flange |
| Controlled Flow Rate | 2.22 |
| Shaft End Flow @ RPM | 3.37 |
