BOSCH 0432191740 injector
The online 420 Bore Diameter (mm) BOSCH 0432191740 injector UKL Hydraulic Components Co., Ltd. parts store gives you immediate access to a selection of 448 mm Fw 75 mm C more than 1.4 million new, used, remanufactured.
| Brand Name: | BOSCH |
| Model Number: | 0432191740 |
| Mounting Flange: | 76.0 LB |
| Spline Description: | Flange Mount |
| Minor Diameter [Min: | Right Hand (CW) |
| Pressure Port Size, Cover End: | 3525VQ25A17-1AA20 |
| Major Diameter [Min: | 3 |
| Weight: | Flange |
| GPM @ 1,800 rpm, Shaft End: | 5/16 in |
| Shaft End Pressure [Max: | Standard Pilot |
Product Details
| Mounting Flange | 76.0 LB |
| Spline Description | Flange Mount |
| Minor Diameter [Min | Right Hand (CW) |
| Pressure Port Size, Cover End | 3525VQ25A17-1AA20 |
| Major Diameter [Min | 3 |
| Weight | Flange |
| GPM @ 1,800 rpm, Shaft End | 5/16 in |
| Shaft End Pressure [Max | Standard Pilot |
| Rotation | 1.25 in |
| Minor Diameter [Max | Straight w/ Key |
| Port Type | 3525VQ |
| Cover End RPM [Max | 2.5 in |
| Manufacturer Part No. | Buna-N |
| Port Size | 2500 |
| Shaft Seal Type | N/A |
| Seal Material | SAE C, 2 Bolt |
| Model No. | Single Shaft Seal |
| Shaft Length | N/A |
| Pressure Port Size, Shaft End | 2500 |
| Shaft Key | 2500 |
| Relief Valve Setting | N/A |
| Pilot Type | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Pump Series | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Integral Valve Configuration | N/A |
| Cover End Pressure [Max | N/A |
| Controlled Flow Rate | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 3525VQ25A17-1AA20 |
| Mounting | 3000 |
| Cover End Flow @ RPM | 3000 |
| Shaft Dia. | 25.5 |
| Port Orientation - Cover End | 37.5 |
| Max. RPM [Max | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 135° CCW from Inlet |
| Minor Diameter | Outlet Opposite Inlet |
| Major Diameter [Max | 1 in Flange |
| Port Orientation - Shaft End | 1 1/4 in Flange |
| Shaft Type | 3.37 |
| Shaft End RPM [Max | 4.98 |
