25M 35M 45M 50M Small High Speed Hydraulic Motors With High Pressure
| Pilot Type: |
15.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Relief Valve Setting: |
SAE-16 |
| Minor Diameter [Max: |
SAE |
| Minor Diameter: |
3/16 in |
| Displacement Shaft End (cu in/revolution): |
20 |
| Shaft Dia.: |
4 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Pilot Type |
15.0 LB |
| Major Diameter [Max |
Flange Mount |
| Weight |
Right Hand (CW) |
| Relief Valve Setting |
SAE-16 |
| Minor Diameter [Max |
SAE |
| Minor Diameter |
3/16 in |
| Displacement Shaft End (cu in/revolution) |
20 |
| Shaft Dia. |
4 gpm @ 1200 rpm |
| Shaft Seal Type |
0.75 in |
| GPM @ 1,800 rpm, Cover End |
Straight w/ Key |
| Port Type |
6 / 1800 |
| Shaft End RPM [Max |
V10 |
| Shaft Length |
1.75 in |
| Manufacturer Part No. |
SAE-8 |
| Spline Description |
Buna-N |
| Shaft End Pressure [Max |
3400 |
| Mounting |
2500 psi |
| Pump Series |
6 |
| Shaft Key |
S |
| Integral Valve Configuration |
SAE A, 2 Bolt |
| Port Orientation - Cover End |
T |
| Port Orientation - Shaft End |
1 |
| Major Diameter [Min |
90° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
0.8 |
| Port Size |
2 gal/min |
| Shaft Type |
Flow Control & Relief |
| GPM @ 1,800 rpm, Shaft End |
1750 psi |
| Mounting Flange |
1D |