Yuken FCG-03 pressure valve
Yuken FCG-03 pressure valve Product Brochures , 0.3 mm rs min Yuken pressure valve NTN Manufacturer Name Manufacturing Service . Get Your UKL Hydraulic Components Co., Ltd. Free.
What is FCG-03 bearing cross reference？
| Brand Name: |
Yuken |
| Model Number: |
FCG-03 |
| Major Diameter [Max: |
45.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Shaft End Flow @ RPM: |
Left Hand (CCW) |
| Minor Diameter [Max: |
2520VQ12A5-11BC20LH |
| Shaft End Pressure [Max: |
2 1/2 |
| Spline Description: |
Flange |
| Displacement Cover End (cu in/revolution): |
N/A |
| Displacement Shaft End (cu in/revolution): |
Standard Pilot |
Product Details
| Major Diameter [Max |
45.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Shaft End Flow @ RPM |
Left Hand (CCW) |
| Minor Diameter [Max |
2520VQ12A5-11BC20LH |
| Shaft End Pressure [Max |
2 1/2 |
| Spline Description |
Flange |
| Displacement Cover End (cu in/revolution) |
N/A |
| Displacement Shaft End (cu in/revolution) |
Standard Pilot |
| Pilot Type |
0.875 in |
| Pressure Port Size, Cover End |
13 Tooth Splined |
| Port Size |
2520VQ |
| Shaft Key |
1 3/8 in |
| Max. RPM [Max |
Buna-N |
| Major Diameter [Min |
2700 |
| Port Orientation - Cover End |
0.715 in |
| Shaft Length |
SAE B, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Pump Series |
16/32 |
| Cover End Flow @ RPM |
2700 |
| Mounting |
2700 |
| Manufacturer Part No. |
N/A |
| Cover End RPM [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter |
0.873 in |
| Shaft Seal Type |
0.872 in |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Controlled Flow Rate |
N/A |
| Seal Material |
N/A |
| Relief Valve Setting |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Model No. |
2520VQ12A5-11BC20LH |
| Integral Valve Configuration |
3000 |
| Shaft End RPM [Max |
3000 |
| Weight |
7.5 |
| Mounting Flange |
18 |
| Port Type |
w/o Integral Valves |
| Minor Diameter [Min |
Outlet 45° CW from Inlet |
| Shaft Type |
Outlet 90° CCW from Inlet |
| Cover End Pressure [Max |
3/4 in Flange |
| Port Orientation - Shaft End |
1 in Flange |
| Rotation |
1.1 |
| GPM @ 1,800 rpm, Shaft End |
2.45 |