Yuken PV2R2-47-F-RAB-4222 single Vane pump
With over 10170 full-service stores, our Yuken PV2R2-47-F-RAB-4222 single Vane pump inventory is extensive and our parts are 2 Bolt Pillow Block Housing Type priced UKL Hydraulic Components Co., Ltd. right. within 24 hours. This helps you maximize your productivity by saving time and your Steel Bearing Outer Ring Material hard-earned dollars.
| Brand Name: | Yuken |
| Model Number: | PV2R2-47-F-RAB-4222 |
| Minor Diameter: | 75.0 LB |
| Shaft Type: | Flange Mount |
| Cover End RPM [Max: | Right Hand (CW) |
| Seal Material: | 3520V25E5-86CB22R |
| Shaft End Pressure [Max: | 3 |
| Model No.: | Flange |
| Port Type: | 5/16 in |
| Major Diameter [Min: | Standard Pilot |
Product Details
| Minor Diameter | 75.0 LB |
| Shaft Type | Flange Mount |
| Cover End RPM [Max | Right Hand (CW) |
| Seal Material | 3520V25E5-86CB22R |
| Shaft End Pressure [Max | 3 |
| Model No. | Flange |
| Port Type | 5/16 in |
| Major Diameter [Min | Standard Pilot |
| Shaft Key | 1.375 in |
| Shaft Seal Type | Straight w/ Key |
| Mounting | 3520V |
| Integral Valve Configuration | 3 7/8 in |
| Pump Series | Buna-N |
| Max. RPM [Max | 1800 |
| Cover End Pressure [Max | N/A |
| Rotation | SAE C, 2 Bolt |
| Controlled Flow Rate | Single Shaft Seal |
| Port Orientation - Cover End | N/A |
| Minor Diameter [Max | 1800 |
| Displacement Shaft End (cu in/revolution) | 1800 |
| Major Diameter [Max | N/A |
| Shaft End RPM [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Dia. | N/A |
| Shaft Length | N/A |
| Shaft End Flow @ RPM | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Weight | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | 3520V25E5-86CB22R |
| Port Size | 3000 |
| Relief Valve Setting | 2500 |
| GPM @ 1,800 rpm, Shaft End | 7.5 |
| Mounting Flange | 37.5 |
| Port Orientation - Shaft End | N/A |
| Pressure Port Size, Shaft End | Outlet 45° CCW from Inlet |
| Pressure Port Size, Cover End | Outlet Inline w/Inlet |
| Manufacturer Part No. | 3/4 in Code 61 |
| Cover End Flow @ RPM | 1 1/4 in Code 61 |
| Pilot Type | 1.1 |
| Spline Description | 4.9 |