Danfoss Shut-off valves 148B4673 STC 32 M STR SHUT-OFF VALVE HANDWHEEL
With over 10170 full-service stores, our Danfoss Shut-off valves 148B4673 STC 32 M STR SHUT-OFF VALVE HANDWHEEL UKL Hydraulic Components Co., Ltd. inventory is extensive and our 5 mm Ca min. parts are priced 4 mm K right. within 24 hours. This helps you 1.5 mm r3,4 min. maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4673 STC 32 M |
| Weight: |
76.0 LB |
| Model No.: |
Flange Mount |
| Pressure Port Size, Shaft End: |
Right Hand (CW) |
| Manufacturer Part No.: |
3525VQ35A21-11DD20 |
| Pressure Port Size, Cover End: |
3 |
| Displacement Shaft End (cu in/revolution): |
Flange |
| Shaft Seal Type: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
76.0 LB |
| Model No. |
Flange Mount |
| Pressure Port Size, Shaft End |
Right Hand (CW) |
| Manufacturer Part No. |
3525VQ35A21-11DD20 |
| Pressure Port Size, Cover End |
3 |
| Displacement Shaft End (cu in/revolution) |
Flange |
| Shaft Seal Type |
N/A |
| Pilot Type |
Standard Pilot |
| Minor Diameter |
1.25 in |
| Mounting |
14 Tooth Splined |
| Max. RPM [Max |
3525VQ |
| Pump Series |
1.9375 in |
| Major Diameter [Max |
Buna-N |
| Cover End Flow @ RPM |
2400 |
| Cover End Pressure [Max |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Controlled Flow Rate |
12/24 |
| Rotation |
2500 |
| Cover End RPM [Max |
2400 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Port Orientation - Shaft End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
1.248 in |
| Relief Valve Setting |
1.247 in |
| Shaft Type |
N/A |
| Shaft End RPM [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Spline Description |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
3525VQ35A21-11DD20 |
| Port Size |
3000 |
| Seal Material |
3000 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Shaft End Flow @ RPM |
52.5 |
| Major Diameter [Min |
w/o Integral Valves |
| Port Type |
Outlet 135° CW from Inlet |
| Integral Valve Configuration |
Outlet 90° CW from Inlet |
| Minor Diameter [Min |
1 in Flange |
| Shaft Dia. |
1 1/4 in Flange |
| Shaft Key |
4.12 |
| Port Orientation - Cover End |
6.88 |