PAKER YB-E25 Piston Pump
With over UKL Hydraulic Components Co., Ltd. 10170 full-service stores, our PAKER YB-E25 Piston Pump inventory is extensive and our parts are priced right. within 24 hours. This helps you 14.3 mm S maximize your productivity by saving time and your hard-earned dollars. 13mm N
| Brand Name: | PAKER |
| Model Number: | YB-E25 |
| Shaft Key: | 76.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Pressure Port Size, Shaft End: | 3525VQ38A14-11AA20 |
| Pilot Type: | 3 |
| Shaft Length: | Flange |
| Rotation: | N/A |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Shaft Key | 76.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Pressure Port Size, Shaft End | 3525VQ38A14-11AA20 |
| Pilot Type | 3 |
| Shaft Length | Flange |
| Rotation | N/A |
| Relief Valve Setting | Standard Pilot |
| Max. RPM [Max | 1.25 in |
| Shaft End Pressure [Max | 14 Tooth Splined |
| Minor Diameter | 3525VQ |
| Seal Material | 1 15/16 in |
| Minor Diameter [Max | Double |
| Shaft End Flow @ RPM | Buna-N |
| Cover End Flow @ RPM | 2400 |
| Mounting | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Shaft Type | Single Shaft Seal |
| Mounting Flange | 12/24 |
| Port Orientation - Cover End | 2500 |
| Spline Description | 2400 |
| Shaft Dia. | N/A |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Major Diameter [Max | 1.248 in |
| Minor Diameter [Min | 1.247 in |
| Port Type | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Model No. | N/A |
| Manufacturer Part No. | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pump Series | 3525VQ38A14-11AA20 |
| Shaft Seal Type | 3000 |
| Integral Valve Configuration | 3000 |
| Weight | 21 |
| GPM @ 1,800 rpm, Cover End | 57 |
| Major Diameter [Min | w/o Integral Valves |
| Controlled Flow Rate | Outlet 135° CCW from Inlet |
| Cover End Pressure [Max | Outlet Opposite Inlet |
| Port Size | 1 in Flange |
| Pressure Port Size, Cover End | 1 1/4 in Flange |
| Port Orientation - Shaft End | 2.8 |