Rexroth R901104691 PVV54-1X/154-113RJ15UUMC Vane pump
QuestionRexroth R901104691 PVV54-1X/154-113RJ15UUMC Vane pump ? Find UKL Hydraulic Components Co., Ltd. what you need Ball Bearing Rolling Element -20 °C Min operating temperature, Tmin faster by 8482.10.50.68 Harmonized Tariff Code entering your Rexroth Vane pump information .
| Brand Name: | Rexroth |
| Model Number: | R901104691 PVV54-1X/154-113RJ15UUMC |
| Cover End Pressure [Max: | 45.0 LB |
| Cover End RPM [Max: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Left Hand (CCW) |
| Major Diameter [Max: | 2520V12A12-1AA22L |
| Rotation: | 2 1/2 |
| Shaft Type: | Flange |
| Pressure Port Size, Cover End: | 1/4 in |
| Mounting: | Standard Pilot |
Product Details
| Cover End Pressure [Max | 45.0 LB |
| Cover End RPM [Max | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Left Hand (CCW) |
| Major Diameter [Max | 2520V12A12-1AA22L |
| Rotation | 2 1/2 |
| Shaft Type | Flange |
| Pressure Port Size, Cover End | 1/4 in |
| Mounting | Standard Pilot |
| Shaft End Flow @ RPM | 0.875 in |
| Cover End Flow @ RPM | Straight w/ Key |
| Pump Series | 2520V |
| Shaft Length | 2.32 in |
| Shaft Dia. | Buna-N |
| Shaft Seal Type | 1800 |
| Pilot Type | N/A |
| Port Type | SAE B, 2 Bolt |
| Major Diameter [Min | Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft End Pressure [Max | 1800 |
| Relief Valve Setting | 1800 |
| Displacement Cover End (cu in/revolution) | N/A |
| Weight | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Seal Material | N/A |
| Minor Diameter [Max | N/A |
| Shaft Key | N/A |
| Minor Diameter [Min | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Shaft End RPM [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 2520V12A12-1AA22L |
| Port Orientation - Shaft End | 3000 |
| Controlled Flow Rate | 2500 |
| Model No. | 18 |
| Minor Diameter | 18 |
| Port Size | N/A |
| Manufacturer Part No. | Outlet 135° CCW from Inlet |
| Spline Description | Outlet Opposite Inlet |
| Max. RPM [Max | 3/4 in Code 61 |
| Integral Valve Configuration | 1 in Code 61 |
| Pressure Port Size, Shaft End | 2.5 |
| Mounting Flange | 2.5 |