Rexroth PVV4-1X/098RJ15UMC Vane pump
With over 10170 full-service stores, our Rexroth PVV4-1X/098RJ15UMC Vane pump inventory is extensive and our parts are priced UKL Hydraulic Components Co., Ltd. right. within 24 hours. This helps you 140 mm L maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | PVV4-1X/098RJ15UMC |
| Shaft Type: | 35.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Relief Valve Setting: | Left Hand (CCW) |
| Port Orientation - Cover End: | V2020-1F11S8S-11CC30LH |
| Seal Material: | 2 |
| Pressure Port Size, Cover End: | Flange |
| Minor Diameter [Max: | N/A |
| Displacement Cover End (cu in/revolution): | N/A |
Product Details
| Shaft Type | 35.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Relief Valve Setting | Left Hand (CCW) |
| Port Orientation - Cover End | V2020-1F11S8S-11CC30LH |
| Seal Material | 2 |
| Pressure Port Size, Cover End | Flange |
| Minor Diameter [Max | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Minor Diameter [Min | 0.875 in |
| Shaft Key | 13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End | V2020 |
| Minor Diameter | 1 5/16 in |
| Pressure Port Size, Shaft End | Buna-N |
| Spline Description | 2500 |
| Port Type | 0.728 in |
| Manufacturer Part No. | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
| Shaft Length | 16/32 |
| Pilot Type | 2800 |
| Shaft End Pressure [Max | 2500 |
| Integral Valve Configuration | N/A |
| Displacement Shaft End (cu in/revolution) | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Cover End RPM [Max | 0.873 in |
| Model No. | 0.872 in |
| Shaft Dia. | 0.7335 in |
| Port Orientation - Shaft End | 0.7225 in |
| Max. RPM [Max | N/A |
| Major Diameter [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | V2020-1F11S8S-11CC30LH |
| Mounting Flange | 2500 |
| Port Size | 2500 |
| Shaft Seal Type | 12 |
| Major Diameter [Min | 16.5 |
| Weight | N/A |
| Cover End Pressure [Max | Outlet Inline w/Inlet |
| Pump Series | Outlet Inline w/Inlet |
| Mounting | 3/4 in SAE O-Ring |
| Controlled Flow Rate | 3/4 in SAE O-Ring |
| Shaft End RPM [Max | 1.62 |
| Rotation | 2.22 |