Yuken PV2R2-59-F-LAA-4222 single Vane pump
How do you 510 kN dynamic load capacity: find UKL Hydraulic Components Co., Ltd. the Yuken PV2R2-59-F-LAA-4222 single Vane pump specification? Manufacturers Online Roller Bearings Category Free check！ 4500 rpm maximum rpm:
| Brand Name: | Yuken |
| Model Number: | PV2R2-59-F-LAA-4222 |
| Port Size: | 75.0 LB |
| Shaft Dia.: | Flange Mount |
| Seal Material: | Right Hand (CW) |
| Shaft Key: | 3520V38E5-11DD22R |
| Relief Valve Setting: | 3 |
| Minor Diameter: | Flange |
| Major Diameter [Min: | N/A |
| GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
Product Details
| Port Size | 75.0 LB |
| Shaft Dia. | Flange Mount |
| Seal Material | Right Hand (CW) |
| Shaft Key | 3520V38E5-11DD22R |
| Relief Valve Setting | 3 |
| Minor Diameter | Flange |
| Major Diameter [Min | N/A |
| GPM @ 1,800 rpm, Shaft End | Standard Pilot |
| Mounting | 1.375 in |
| Mounting Flange | 14 Tooth Splined |
| Port Type | 3520V |
| Pilot Type | 2 5/16 in |
| Port Orientation - Cover End | Buna-N |
| Pump Series | 1800 |
| Pressure Port Size, Shaft End | 1.055 in |
| GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
| Pressure Port Size, Cover End | Single Shaft Seal |
| Rotation | 12/24 |
| Shaft End RPM [Max | 1800 |
| Major Diameter [Max | 1800 |
| Model No. | N/A |
| Shaft Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 1.25 in |
| Cover End Flow @ RPM | 1.247 in |
| Shaft Length | 1.06 in |
| Manufacturer Part No. | 1.05 in |
| Weight | N/A |
| Minor Diameter [Min | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Integral Valve Configuration | 3520V38E5-11DD22R |
| Displacement Shaft End (cu in/revolution) | 3000 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Cover End RPM [Max | 7.5 |
| Minor Diameter [Max | 57 |
| Spline Description | N/A |
| Controlled Flow Rate | Outlet 135° CW from Inlet |
| Shaft End Flow @ RPM | Outlet 90° CW from Inlet |
| Shaft End Pressure [Max | 3/4 in Code 61 |
| Max. RPM [Max | 1 1/4 in Code 61 |
| Cover End Pressure [Max | 1.1 |
| Port Orientation - Shaft End | 7.4 |