Rexroth DBDS10P1X/50 100 200 315 350 PRESSURE RELIEF VALVE
YOU’LL FIND UKL Hydraulic Components Co., Ltd. AN EXTENSIVE SELECTION OF Rexroth DBDS10P1X/50 100 200 315 350 PRESSURE RELIEF VALVE Pillow Block Bearing Category FOR SALE.
What is DBDS10P1X/50 100 200 315 350 bearing cross reference？
| Brand Name: | Rexroth |
| Model Number: | DBDS10P1X/50 100 200 315 350 |
| Spline Description: | 101.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| Pilot Type: | Left Hand (CCW) |
| Shaft End Flow @ RPM: | 4525VQ60A21-11AA20-LH |
| Port Size: | 3 1/2 |
| Port Orientation - Shaft End: | Flange |
| GPM @ 1,800 rpm, Shaft End: | N/A |
| GPM @ 1,800 rpm, Cover End: | Standard Pilot |
Product Details
| Spline Description | 101.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| Pilot Type | Left Hand (CCW) |
| Shaft End Flow @ RPM | 4525VQ60A21-11AA20-LH |
| Port Size | 3 1/2 |
| Port Orientation - Shaft End | Flange |
| GPM @ 1,800 rpm, Shaft End | N/A |
| GPM @ 1,800 rpm, Cover End | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 1.25 in |
| Cover End RPM [Max | 14 Tooth Splined |
| Shaft Key | 4525VQ |
| Pressure Port Size, Cover End | 1.9375 in |
| Pump Series | Buna-N |
| Controlled Flow Rate | 2200 |
| Minor Diameter | 1.04 in |
| Shaft Length | SAE C, 2 Bolt |
| Manufacturer Part No. | Single Shaft Seal |
| Mounting Flange | 12/24 |
| Model No. | 2200 |
| Mounting | 2200 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft Seal Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation | 1.248 in |
| Cover End Pressure [Max | 1.247 in |
| Weight | N/A |
| Major Diameter [Min | N/A |
| Port Type | N/A |
| Shaft Dia. | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Relief Valve Setting | 4525VQ60A21-11AA20-LH |
| Shaft End Pressure [Max | 3000 |
| Max. RPM [Max | 2500 |
| Shaft Type | 31.5 |
| Seal Material | 90 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CCW from Inlet |
| Shaft End RPM [Max | Outlet Opposite Inlet |
| Major Diameter [Max | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/2 in Flange |
| Minor Diameter [Min | 4.12 |
| Minor Diameter [Max | 11.8 |