Rexroth Z2DB10VC2-4X/315V PRESSURE RELIEF VALVE
The online Rexroth Z2DB10VC2-4X/315V PRESSURE RELIEF VALVE 24 mm roller width: parts store gives you immediate access to a selection of more than UKL Hydraulic Components Co., Ltd. 1.4 million new, used, remanufactured.
| Brand Name: | Rexroth |
| Model Number: | Z2DB10VC2-4X/315V |
| Cover End Flow @ RPM: | 75.0 LB |
| Shaft Type: | Flange Mount |
| Minor Diameter [Min: | Right Hand (CW) |
| Major Diameter [Max: | 3520VQ30E11-11AA20 |
| Spline Description: | 3 |
| Pressure Port Size, Cover End: | Flange |
| Weight: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Cover End Flow @ RPM | 75.0 LB |
| Shaft Type | Flange Mount |
| Minor Diameter [Min | Right Hand (CW) |
| Major Diameter [Max | 3520VQ30E11-11AA20 |
| Spline Description | 3 |
| Pressure Port Size, Cover End | Flange |
| Weight | N/A |
| Pilot Type | Standard Pilot |
| Integral Valve Configuration | 1.25 in |
| Seal Material | 14 Tooth Splined |
| Manufacturer Part No. | 3520VQ |
| Mounting | 1.9375 in |
| Pump Series | Double |
| Port Size | Buna-N |
| Port Orientation - Cover End | 2500 |
| Model No. | 1.04 in |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| Rotation | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 12/24 |
| Displacement Shaft End (cu in/revolution) | 6 |
| Relief Valve Setting | 2500 |
| Port Orientation - Shaft End | N/A |
| Minor Diameter | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Type | 1.248 in |
| Major Diameter [Min | 1.247 in |
| Pressure Port Size, Shaft End | N/A |
| Shaft Length | N/A |
| Shaft End Pressure [Max | N/A |
| Shaft End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 3520VQ30E11-11AA20 |
| Shaft Seal Type | 3000 |
| Mounting Flange | 3000 |
| Max. RPM [Max | 16.5 |
| Controlled Flow Rate | 45 |
| Minor Diameter [Max | w/o Integral Valves |
| Shaft Dia. | Outlet 135° CCW from Inlet |
| Cover End RPM [Max | Outlet Opposite Inlet |
| Shaft End RPM [Max | 1 1/16 in SAE O-Ring |
| Shaft Key | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 2.2 |