Rexroth A10VSO45DR/31R-PPA12N00 Piston Pump
Find the Radial Load Direction discount UKL Hydraulic Components Co., Ltd. Rexroth A10VSO45DR/31R-PPA12N00 Piston Pump online you need . We offer ... If you check out our large selection Punching Retainer Type of Rexroth A10VSO45DR/31R-PPA12N00 Piston Pump once .
| Brand Name: | Rexroth |
| Model Number: | A10VSO45DR/31R-PPA12N00 |
| Pressure Port Size, Cover End: | 76.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Mounting Flange: | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: | 3525VQ35A21-11DD20 |
| Shaft Type: | 3 |
| Pressure Port Size, Shaft End: | Flange |
| Shaft End Pressure [Max: | N/A |
| Displacement Cover End (cu in/revolution): | Standard Pilot |
Product Details
| Pressure Port Size, Cover End | 76.0 LB |
| Minor Diameter [Max | Flange Mount |
| Mounting Flange | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End | 3525VQ35A21-11DD20 |
| Shaft Type | 3 |
| Pressure Port Size, Shaft End | Flange |
| Shaft End Pressure [Max | N/A |
| Displacement Cover End (cu in/revolution) | Standard Pilot |
| Shaft End Flow @ RPM | 1.25 in |
| Pilot Type | 14 Tooth Splined |
| Spline Description | 3525VQ |
| Port Size | 1.9375 in |
| Cover End RPM [Max | Buna-N |
| Major Diameter [Max | 2400 |
| Weight | 1.04 in |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Integral Valve Configuration | 12/24 |
| Pump Series | 2500 |
| Minor Diameter [Min | 2400 |
| Controlled Flow Rate | N/A |
| Shaft Dia. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Seal Material | 1.248 in |
| Minor Diameter | 1.247 in |
| Port Type | N/A |
| Rotation | N/A |
| Model No. | N/A |
| Mounting | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 3525VQ35A21-11DD20 |
| Max. RPM [Max | 3000 |
| Major Diameter [Min | 3000 |
| Shaft Length | 31.5 |
| Shaft Seal Type | 52.5 |
| Shaft End RPM [Max | w/o Integral Valves |
| Cover End Pressure [Max | Outlet 135° CW from Inlet |
| Manufacturer Part No. | Outlet 90° CW from Inlet |
| Shaft Key | 1 in Flange |
| Relief Valve Setting | 1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 4.12 |
| Port Orientation - Cover End | 6.88 |