Danfoss Shut-off valves 148B4619 STC 125 A ANG SHUT-OFF VALVE HANDWHEEL
Request A 0.12 kg Mass plain bearing Quote For UKL Hydraulic Components Co., Ltd. Your Special Danfoss Shut-off valves 148B4619 STC 125 A ANG SHUT-OFF VALVE HANDWHEEL Needs Today! Free Danfoss Shut-off valves Quotes. 37.7 mm Da max. ISO 9001 certified.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4619 STC 125 A |
| Minor Diameter [Max: |
75.0 LB |
| Pilot Type: |
Flange Mount |
| Shaft Seal Type: |
Right Hand (CW) |
| Mounting Flange: |
3520V35A11-1CB22R |
| Cover End Flow @ RPM: |
3 |
| Cover End Pressure [Max: |
Flange |
| Max. RPM [Max: |
5/16 in |
| Shaft Type: |
Standard Pilot |
Product Details
| Minor Diameter [Max |
75.0 LB |
| Pilot Type |
Flange Mount |
| Shaft Seal Type |
Right Hand (CW) |
| Mounting Flange |
3520V35A11-1CB22R |
| Cover End Flow @ RPM |
3 |
| Cover End Pressure [Max |
Flange |
| Max. RPM [Max |
5/16 in |
| Shaft Type |
Standard Pilot |
| Seal Material |
1.25 in |
| Mounting |
Straight w/ Key |
| Shaft End Pressure [Max |
3520V |
| Model No. |
2 7/8 in |
| Minor Diameter [Min |
Buna-N |
| Port Size |
1800 |
| Port Orientation - Cover End |
N/A |
| Pump Series |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Port Orientation - Shaft End |
N/A |
| Rotation |
1800 |
| Shaft Length |
1800 |
| Integral Valve Configuration |
N/A |
| Major Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Type |
N/A |
| Shaft End Flow @ RPM |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Cover End RPM [Max |
N/A |
| Relief Valve Setting |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3520V35A11-1CB22R |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Controlled Flow Rate |
2500 |
| Shaft Dia. |
16.5 |
| Displacement Cover End (cu in/revolution) |
52.5 |
| Pressure Port Size, Cover End |
N/A |
| GPM @ 1,800 rpm, Shaft End |
Outlet 45° CCW from Inlet |
| Shaft End RPM [Max |
Outlet Inline w/Inlet |
| Weight |
3/4 in Code 61 |
| Spline Description |
1 1/4 in Code 61 |
| Shaft Key |
2.2 |
| Minor Diameter |
6.8 |