Rexroth DBDS10G1X/50 100 200 315 350 PRESSURE RELIEF VALVE
How do you find the Rexroth DBDS10G1X/50 100 200 315 350 PRESSURE RELIEF VALVE specification? UKL Hydraulic Components Co., Ltd. Manufacturers No Maximum Capacity / Filling Slot Online 0.0 Inventory Free check！
| Brand Name: | Rexroth |
| Model Number: | DBDS10G1X/50 100 200 315 350 |
| Mounting Flange: | 45.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Major Diameter [Min: | Right Hand (CW) |
| Pump Series: | 2520VQ17A11-11BB20 |
| Minor Diameter [Max: | 2 1/2 |
| Major Diameter [Max: | Flange |
| Shaft End Flow @ RPM: | N/A |
| Spline Description: | Standard Pilot |
Product Details
| Mounting Flange | 45.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Major Diameter [Min | Right Hand (CW) |
| Pump Series | 2520VQ17A11-11BB20 |
| Minor Diameter [Max | 2 1/2 |
| Major Diameter [Max | Flange |
| Shaft End Flow @ RPM | N/A |
| Spline Description | Standard Pilot |
| Shaft End RPM [Max | 0.875 in |
| Minor Diameter | 13 Tooth Splined |
| Rotation | 2520VQ |
| Model No. | 1 3/8 in |
| Pressure Port Size, Cover End | Buna-N |
| Shaft Type | 2500 |
| Pressure Port Size, Shaft End | 0.715 in |
| Weight | SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Integral Valve Configuration | 16/32 |
| GPM @ 1,800 rpm, Shaft End | 2700 |
| Mounting | 2500 |
| Max. RPM [Max | N/A |
| Controlled Flow Rate | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | 0.873 in |
| Shaft Length | 0.872 in |
| Cover End Flow @ RPM | N/A |
| Port Orientation - Shaft End | N/A |
| Shaft Seal Type | N/A |
| Port Size | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | 2520VQ17A11-11BB20 |
| Cover End RPM [Max | 3000 |
| Port Type | 3000 |
| Relief Valve Setting | 16.5 |
| Pilot Type | 25.5 |
| Manufacturer Part No. | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 45° CCW from Inlet |
| Seal Material | Outlet 90° CCW from Inlet |
| Shaft Dia. | 3/4 in Flange |
| Displacement Cover End (cu in/revolution) | 1 in Flange |
| Shaft Key | 2.22 |
| Cover End Pressure [Max | 3.37 |